PHOTO

Continuous motion, single roll, overlap bundler. Speeds capable up to 70 ppm. Integrated bundler.

Shrink bundler & tunnel. Handles trays and multipacking/accumulating with Starwheel Infeed. Up to 70 BPM. Allen Bradley SLC 503. Servo Motors. Printed film and plain.

High speed continuous motion single roll print registered wrapper built with a heavy duty frame with Allen Bradley SLC 5/04 programmable controls, Omron digital temperature controls, Low Film alert and quick change over capability. Speeds up to 60/minute depending on package size.

High speed continuous motionsingle roll print registered wrapper built with a heavy duty frame with Allen Bradley SLC 5/04 programmable controls, Omron digital temperature controls, Low Film alert and quick change over capability. Speeds up to 50/minute depending on package size.

Shrink bundler with 20” hot seal bar, and 20” cold seal bar assembly.

Arpac 55-36 inline shrink bundler. 36” seal bar. Allen Bradley SLC 500 controls.

Shrink bundler previously wrapping trays of .5 L, 1 L, and 20 oz bottles.

Arpac 105-24 shrink bundler. Manufacturer rated 20 bpm. On casters.

Shrink Bundler uses up to 60” wide flat pvc film and includes two adjustable forming plows. Two stage infeed conveyor and longitude static lap seal. Film perforator.

Right angle shrink bundler. 15-20 bpm in trays, 10-12 bpm if product is unsupported. 440v 3Phase, 60HZ. Air supply 60-80 PSI.

Arpac 115-24TW last running trays of juice. Has a pacing gate and product hold down. Manufacturer rated speed up to 25 bundles per minute.

Dual Lane Shrink applicator and dual heat tunnels, with discharge accumulation conveyor. Rated at 60 packages per minute. System utilizes two individual film rolls. Was previously used for bundling groups of 3 or 4 bottles for club stores.

Shrink Bundler w/ Allen Bradley SLC 5/01 Controls, Up to 60 CPM.

Inline Shrink Bundler for the Printing Industry, up to 30 ppm

Stainless Steel In-line Automatic Shrink Bundler. Speeds to 30 BPM.

Right Angle Shrink Bundler, Speeds to 20 bpm.

Automatic full wrap-around with side seal shrink bundler in great condition, currently with Siemens controls, but would be upgraded to AB PLC. 25” Seal bar, 44” Max Film width with a max height of 10”, 20 ppm.

Currently set up to run 700ml Armstrong, 20oz, and 1.0 liter. Bottle diameter size: 63.2 mm - 79 mm minimum. Can run formats of 4x6, 4x7, 4x8, possibly 4x4 & 4x5. Also runs formats 1,2,3, up to 4 bottles wide and anywhere from 2 to 8 bottles lengthwise, height of package from 125mm to 314mm min - 45 cases/min. Tunnel 1 Liter 15 pk(3x5) 18 pk(6x3) Armstrong 700ml 24 pk(6x4), 28 pk(7x4)….2-12 pks are same change parts along with 4-6 pks! 20 oz. 24 pk(6x4), 28 pk(7X4)

Semi Automatic Shrink Bundler

Right Angle, Automatic Shrink Bundler/Accumulator. Single Lane.

Shrink bundler capable of full encloser. Overlap on top, upside down forming head. Accepts film up to 32” wide.

Continuous Motion Shrink Bundler, to 35 CPM per lane. Mitsubishi Controls; Top and bottom film roll. 32” seal bar; Heavy gauge stainless steel construction; equipped with portable caster package

Single roll form, fill and seal bundler. Manufactured speeds rated at up to 60 per minute. Only uses clear film.

Stainless steel intermittent shrink bundler designed for collation of products. 32” Wide single lane, 14” wide dual lane. Speeds up to 34 per minute.

Automatic or Semi Automatic Shrink Bundler with right angle feed. Speeds to 15-25 bpm.

Top and Bottom shrink bundler. Infeed conveyor is 7.5” wide. Last running six 500 ml cartons of milk.

Automatic Stainless Steel Shrink Bundler and tunnel.